JVC RX-778VBK User Manual

30
English
Creating Your Own SEA Mode
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
3. Press % / fi to move to “SEA,” then press
@ / #.
The SEA menu appears.
4. Press % / fi to move
to “SEA ADJUST.”
The SEA ADJUST menu
appears.
5. Press % / fi / @ / # to
adjust the SEA mode as
you want.
@ / # : Select the frequency ranges.
% / fi : Adjust the frequency levels.
6. Press SET to store the setting into the SEA
USERMODE.
• If you press EXIT, without pressing SET in this step, you can
return to the SEA menu. (The adjustment you have made is
active but not stored.)
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
For Dolby Pro Logic:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker
output level.*
For Dolby Digital Surround:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker
output level.*
For JVC Theater Surround:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker
output level.*
“DSP EFFECT”: Select the effect level.
Notes:
* Not displayed when “REAR SPK” is set to “NONE” (see page
14).
** Not displayed when “CENTER SPK” is set to “NONE” (see
page 14).
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Selecting Your Favorite SEA Mode
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
3. Press % / fi to move
to “SEA,” then press
@ / #.
The SEA menu appears.
4. Press % / fi to move
to “SEA MODE.”
5. Press @ / # to select the SEA mode you want.
6. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
EN28-38.RX-778V[C]/1 99.4.26, 8:18 PM30

JVC RX-778VBK Specifications

General

Brand	JVC
Model	RX-778VBK
Category	Receiver
Language	English