EasyManuals Logo
Home>JVC>Stereo System>SP-MXJ57

JVC SP-MXJ57 User Manual

JVC SP-MXJ57
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
– 11 –
Surround modes *:
D.CLUB: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA modes:
ROCK: Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
Manual modes:
MANUAL1/2/3:
Your individual mode stored in memory. See
“Creating Your Own Sound Mode — Manual
Mode.
OFF: Cancels the sound mode.
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
While one of the SEA modes including manual modes (SEA
elements without surround elements) is selected,
it lights up as —
Creating Your Own Sound Mode — Manual
Mode
You can change SEA pattern to suit your preference. These
changed settings can be stored in the MANUAL 1, 2, and 3
modes.
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
If you want to add the surround elements in your SEA
pattern, select one of the surround modes (D.CLUB,
HALL, or STADIUM) before starting the procedure below.
On the unit ONLY:
1
Press and hold SEA CONTROL until
“SEA CONT” appears on the display.
2
Adjust the SEA pattern.
1) Press 4 or ¢ to select the
frequency range to adjust
(LOW, MID, HIGH).
2) Press 1 or ¡ to adjust the
level (–3 to +3) of the selected
frequency range.
3) Repeat steps 1) and 2) to adjust
the level of the other frequency ranges.
3
Press SEA CONTROL again.
4
Press 4 or ¢ to select one of the
MANUAL 1, 2, and 3 modes into which you
want to store the SEA pattern.
5
Press SEA CONTROL again.
The SOUND MODE indicator also lights up.
The SEA pattern you have created are stored into the
MANUAL mode selected in the above step.
To use your own sound mode
Select MANUAL 1, 2, or 3 mode when using the sound
modes. See “Selecting the Sound Modes.
SOUND MODE
SOUND MODE
Current level appears.
SET
SEA CONTROL
PRESET
TUNING
SOUND MODE
SET
SEA CONTROL
SET
SEA CONTROL
EN01-12.MX-J50[A]/1 99.4.15, 10:57 AM11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC SP-MXJ57 and is the answer not in the manual?

JVC SP-MXJ57 Specifications

General IconGeneral
BrandJVC
ModelSP-MXJ57
CategoryStereo System
LanguageEnglish

Related product manuals