EasyManuals Logo
Home>JVC>Speaker System>SP-MXK10

JVC SP-MXK10 User Manual

JVC SP-MXK10
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
26
Using the Microphone
English
To Apply Digital Echo
Press the ECHO button on the Remote Control.
The Echo indicator ( ) comes on.
To cancel the ECHO, press the ECHO button again. The Echo
indicator goes off.
To prevent howling and squealing (feedback) when using
the microphone, adjust the volume properly. Also, try to
avoid to pointing the microphone towards the speaker.
To Record Your Singing
1
Follow the steps in “Singing Along with
Karaoke” above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 18.
Microphone Mixing
When using special Karaoke sources for Karaoke, use the follow-
ing procedure.
1
Turn the MIC LEVEL control on the Unit to
MIN.
2
Connect a microphone by plugging it into the
MIC jack.
3
Start a source CD, tape, or other equipment.
4
Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote Control.
When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
( ) will come on.
To Record Microphone Mixing
1
Follow the steps in “Singing Along with
Karaoke” above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 18.
Playing the Microphone Sound
through the Speakers
You can directly output the microphone sound from the speakers.
1
Turn the MIC LEVEL control on the Unit to
MIN.
2
Connect a microphone by plugging it into the
MIC jack.
3
Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote control.
When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
( ) will come on.
Recording from the Microphone
1
Follow the steps in “Singing Along with
Karaoke” above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 18.
No echo is applied.
An echo is applied.
MX-K30&K10[UW].book Page 26 Tuesday, March 19, 2002 11:22 AM

Table of Contents

Other manuals for JVC SP-MXK10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC SP-MXK10 and is the answer not in the manual?

JVC SP-MXK10 Specifications

General IconGeneral
BrandJVC
ModelSP-MXK10
CategorySpeaker System
LanguageEnglish

Related product manuals