EasyManuals Logo
Home>JVC>Home Theater System>SP-PWM45

JVC SP-PWM45 User Manual

JVC SP-PWM45
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
Getting started
17
English
For TV operations
You can operate your TV using the remote control supplied with
this system.
Refer also to the instruction manuals supplied with your TV.
7 To set the manufacturer’s code
You can operate a JVC TV without setting the remote control
signal.
1 Slide the remote control mode selector
to TV.
2 Press and hold F TV.
Keep the button pressed until step 4 is finished.
3 Press ENTER.
4 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV: Press 1, then 0.
For a Toshiba TV:Press 0, then 8.
5 Release F TV.
6 Try operating your TV by pressing
F TV.
When your TV turns on or off, you have entered the correct
code.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
NOTE
Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
Set the codes again after replacing the batteries of the remote control.
7 Operation
IMPORTANT
Before using the remote control to operate a
TV;
Set the remote control mode selector to TV.
The following buttons are available:
F TV: Turns TV on and off.
TV VOL +/–: Adjusts the volume.
TV/VIDEO: Selects the input mode (either TV or
VIDEO).
CHANNEL +/–: Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN: Alternates between the previously selected
channel and the current channel.
For DBS tuner or CATV converter
operations
You can operate your DBS tuner or CATV converter using the
remote control supplied with this system.
Refer also to the instruction manuals supplied with your DBS
tuner or CATV converter.
7 To set the manufacturer’s code
1 Slide the remote control mode selector
to VCR/DBS.
2 Press and hold DBS.
Keep the button pressed until step 4 is finished.
3 Press ENTER.
Remote control
mode selector
Number
buttons
(play button)
Manufacturer Code Manufacturer Code
JVC 01 Samsung 12
Hitachi 10 Sanyo 13
Magnavox 02 Sharp 06
Mitsubishi 03 Sony 07
Panasonic 04, 11 Toshiba 08
RCA 05 Zenith 09
TH-M65-55-45[C]-04Start.fm Page 17 Tuesday, April 22, 2003 5:23 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC SP-PWM45 and is the answer not in the manual?

JVC SP-PWM45 Specifications

General IconGeneral
BrandJVC
ModelSP-PWM45
CategoryHome Theater System
LanguageEnglish

Related product manuals