JVC SP-PWM508 User Manual

Connections
13
To avoid damaging the powered subwoofer, set the VOLTAGE
SELECTOR switch to the voltage of your area.
When you change the position of the VOLTAGE SELECTOR
switch, use a tool such as a slotted screwdriver, etc.
CAUTION
DO NOT plug the power cord of the powered subwoofer
before setting the VOLTAGE SELECTOR switch to the
correct voltage.
Make sure that all other connections have been completed.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
• If the AC outlets do not match the AC plugs, use the supplied AC plug
adaptors.
Setting the VOLTAGE
SELECTOR switch
SP-PWM303 (except for Australia)
SP-PWM508
Connecting the power
cord
Center unit Powered
subwoofer
Power cord
(supplied)
Power cord
Plug into AC outlets.

JVC SP-PWM508 Specifications

General

Brand	JVC
Model	SP-PWM508
Category	Home Theater System
Language	English