JVC TD-W777C User Manual

TD-W777 wevcrercisu
e Re-assembling of disk base unit
1, Re-assemble the disk base unit in order of numbers (D—
@®) shown in the figure.
a) When setting the cam gear (1), make sure of its posi-
tioning so that the gear’s wide side makes aright angle
with the disk while its small side is in parallel with the
disk as shown in the figure.
b) Engage the gears @), @) and @ each other.
c) When putting back the head base cam 5, pay careful
attention to positioning it so that big and small con-
caves are paralleled with the disk.
2. Turn the gear 2 @ in the direction of the arrow mark,
and stop turning when the cam gear @ and the head
base cam () are free from each other (slit of the head
base cam can be seen on the opposite side).
e Fixing disk base unit to chassis
Join together the head base cam and the pinch roller
cam so as to catch on each other by the slits.
Helical Gear —
Pinch Roller Cam
8 (No. 4292)
Gear's wide side makes a righ
angle with the disk.
Gear’s small side is paralleled wi
the disk.
Fig. 6-12
4
( elical Gear
Gear 4)
Gear 2
Fig. 6-13
Small hole
Put together by fitting the rugged-
ness in each other.
Fig. 6-14
Set head base cam and pinch roller
cam by the slits.
Fig. 6-15

JVC TD-W777C Specifications

General

Brand	JVC
Model	TD-W777C
Category	Cassette Player
Language	English