To Next PageTo Next PageTo Previous PageTo Previous Page
Why is there no sound coming from my JVC TH-C6?
If you're not getting any sound from your JVC Home Theater System, there are several things to check: First, make sure the system cord and speaker cords are properly connected. Next, verify that the audio cord is correctly connected to AUDIO IN (VCR) and/or DIGITAL IN (DBS). Ensure that you've selected the correct source and the proper decode mode on your system.
What to do if JVC TH-C6 Home Theater System remote control does not work?
If your JVC Home Theater System remote control isn't working, the first thing to check is the batteries. If they're exhausted, replace them. Also, make sure that direct sunlight isn't falling on the remote sensor, as this can interfere with its operation. If sunlight is the issue, simply shield the sensor from the direct light.
What to do if no picture is displayed on the TV screen with JVC TH-C6?
If there's no picture displayed on your TV screen when using your JVC Home Theater System, ensure the video cord is correctly connected. Also, verify that the disc you're trying to play is a playable disc.
How to adjust the picture to fit the TV screen on my JVC TH-C6?
If the picture from your JVC Home Theater System doesn't fit the TV screen, it might be due to an incorrect monitor type setting. You should set “MONITOR TYPE” properly.
Why are the video and audio distorted on my JVC TH-C6?
If the video and audio are distorted on your JVC Home Theater System, the disc might be the problem. Try replacing or cleaning the disc. Also, if you have a VCR connected between the center unit and the TV, connect the center unit and TV directly.
What to do if the picture is blurred or divided into two parts on JVC TH-C6?
If the picture displayed on your TV screen is blurred or divided into two parts when using your JVC Home Theater System, it could be due to the scan mode being set to “PROGRESS”. This can happen if your TV does not support progressive video input. Change the scan mode to “INT-LACE”.
How to troubleshoot power issues on a JVC Home Theater System?
If your JVC Home Theater System's power doesn't come on, the power cord and/or system cord might not be properly connected. Ensure that both cords are correctly connected.
What to do if it's hard to listen to broadcast because of noise on JVC TH-C6?
If you're experiencing difficulty listening to the broadcast due to noise on your JVC Home Theater System, the antennas may be disconnected. Reconnect the antennas correctly and securely.
General| Brand | JVC |
|---|---|
| Model | TH-C6 |
| Category | Home Theater System |
| Channels | 5.1 |
| DVD Player | Yes |
| HDMI Inputs | 1 |
| Component Video Output | Yes |
| FM Tuner | Yes |
| Remote Control | Yes |
| USB Port | Yes |
| HDMI Output | 1 |
| Bluetooth | No |
Covers electrical hazards, FCC compliance, and handling guidelines for safe operation.
Specific warnings and precautions related to laser components and potential hazards.
Detailed safety instructions for preventing electrical shock and proper product handling.
Guides for connecting front, surround, and center speakers to the system.
Steps for connecting TVs, VCRs, and digital/analog components.
Procedures for setting up the remote to control other devices.
How to operate connected TVs, DBS tuners, and VCRs using the remote.
How to turn the system on/off and select audio/video sources.
Instructions for disc insertion, playback, pause, stop, and navigation.
Explanation of various surround sound modes and signal indicators.
