– 28 –
English
Recording FM/AM Broadcasts
You can record from an FM or AM broadcast onto a tape.
On the unit ONLY:
1
Insert a recordable cassette into the cassette loading
slot.
• Press TAPE @ # to adjust the tape direction
to “
” then 7.
2
Tune in a station you want.
• For more detailed operations, see pages 15 and 16.
3
Press MODE select to select a recording mode.
• Each time you press the button, recording mode
changes as follows:
4
Press REC start.
The recording starts.
To stop recording, press 7.
Recording mode
Tape indicator
Reverse mode
Ex.When selecting MODE 1/2
MODE1/2 MODE2/2
Canceled
Continued
To check the clock time while recording from the
broadcast onto a tape
On the remote control ONLY:
Press DISPLAY (not on number buttons.)
• Each time you press the button, the recording
information and the clock time alternate on the display.
Recording CD—CD Synchronized Recording
You can record from a CD onto a tape.
Using these synchronized recording methods, you can start
and stop CD play and tape recording at the same time.
On the unit ONLY:
1
Insert a recordable cassette into the cassette loading
slot.
• Press TAPE @ # to adjust the tape direction
to “
” then 7.
2
Prepare a CD.
• After loading the CD, press CD # / 8, then 7 before
going to the next step.
• You can make a program (see page 20) or select
Random Play (see page 21) if you want.
3
Press MODE select to select a recording mode.
• Each time you press the button, recording mode
changes as follows:
4
Press REC start.
Both the CD play and the recording start.
• After the recording, both the CD player and the
cassette deck stop automatically.
To stop recording, press 7.
CD play stops first, then after 4 seconds, the recording
stops.
Tuner indicator
MODE1/2 MODE2/2
Canceled
Ex. When selecting MODE 1/2
Recording mode
CD indicator
Tape indicator
Reverse mode
What’s a Recording Mode and Reverse Mode ?
You have two methods (MODE 1/2 and 2/2) to record
from some sources onto a tape.
: To record the front and reverse sides once.
: To only record one side (front or reverse.)
In the following procedure, MODE 1/2 ( ) is selected
as a recording method.
Reverse mode
Recording
mode
MODE 1/2
MODE 2/2
EN26-29UX-A52[UW]_f 01.12.18, 2:21 PM28
To Next Page
Loading...
Need help?
General
