JVC UX-A70MD User Manual

1-4
UX-A70MD
1.3. Cautions on removing the CD traverse unit
* For removing the CD traverse unit in detail, refer to the "Adjustment Method" section of this manual.
1. Before disconnecting the flexible wire from the connector CN601 on the CD SERVO board, solder the part shown in
the figure below.
(Note:If the flexible wire is disconnected from the CN601 without presoldering, it may cause breakdown of the CD
pickup assembly.)
2. When reassembling the CD traverse unit, be sure to remove the solder from the soldered part after reconnecting the
flexible wire to the CN601.
CD SERVO board
CD SERVO board
Soldering part
CN601
CN601
CN321
CN451
Pickup
Soldering part b
MAIN board
CD SERVO board

JVC UX-A70MD Specifications

General

Brand	JVC
Model	UX-A70MD
Category	Stereo System
Language	English