JVC UX-C7 User Manual

| uxcr B/E/G/GI/EN
Setting the timer
@ The current time must be set before the timer can be
used.
@ Press the TIMER ( © ) button while pressing the
SHIFT button.
© Biinks
fi a’ ID») c» ON y While pressing the SHIFT button
SHIFT @TIMER) =tsve
@ Set the start time
(Example: when the timer start time is set to PM 12:15.)
Mmancm °&
ON J @ Press to set the start time.
(DOWN) (UP) (M4 Fie Fat
toad i i”
© Set the stop time
(Example: when the timer stop time is set to PM 1:15.)
Blinks
© ;
CBnA@ = GG
(DOWN)
O
UP)
fA
uM
!
|
Cc
ENTER)
©
Press
to
set
the
timer
off
time.
While pressing the SHIFT button
AZ
© Select the TIMER mode.
TUNER
+
Cy)
~C-
eee
Op
@
The
selected
timer
mode
is
shown
in
the
display.
om) ve r (ENTER)
cD
+
TAPE
When the UP button is pressed to select the timer
mode, the mode changes from the TUNER (timer
reception
of
a
broadcast)
to
TUNER/REC
(timer
‘
:
:
recrting
ofa
Goede
co
(timer
aban
ofa
e
The
unit
enter
the
previously
engaged
mode
and
timer
CD),
TAPE
(timer
playback
of
a
tape),
in
this
order.
setting
is
complete.
® To check the timer setting
1. Press the ( @ ) TIMER button while pressing the
SHIFT button.
2. Press the ENTER button while pressing the SHIFT
button to check the timer mode.
3. When the previous engaged mode is displayed, timer
setting has been completed.
Notes:
e When the timer is set incorrectly or the correct mode is
not selected, perform "Setting the timer" from the
beginning.
@ When the timer is set, "-:--" in the display is replaced by
the input digits.
e@ When the timer stop time is not set, the timer operates
for 2 hours and then the unit is switched off.
(No. 1898) 21

JVC UX-C7 Specifications

General

Brand	JVC
Model	UX-C7
Category	Stereo System
Language	English