5
Step 3: Hook Up
If you need more detailed information, see page 7.
For more detailed information on connecting external equipment, see page 13.
AM
EXT
GND
AM
LOOP
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
Turn the power off to all components before connections.
To a wall outlet
Plug the AC power cord only after all connections are complete.
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna
using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
Vynile-covered wire (not supplied)
Extend it horizontally.
AM loop antenna
Keep it connected.
For better FM/AM reception
Outdoor FM
antenna
(not supplied)
UX-G45[B].BOOK Page 5 Thursday, March 2, 2006 4:26 AM
To Next Page
Loading...
Need help?
General
