17
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD 3/8.
While pausing, the elapsed playing time flashes on
the display.
To resume playing, press CD 3/8 again.
To go to another track
Before or during play, press ¢ or
4 repeatedly.
• ¢ : Skips to the beginning of the
next or succeeding tracks.
• 4 : Goes back to the beginning of the current or
previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or during play allows
you to start playing the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
To locate a particular point in a track
During play, press and hold ¢ or
4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
Programming the Playing Order of the Tracks
—Program Play
You can arrange the order in which tracks play before you
start playing. You can program up to 20 tracks.
On the remote control ONLY:
1
Load a disc.
• If the current playing source is not the CD player,
press CD 3/8, then 7 before going to the next step.
2
Press PRGM (program).
The PRGM (program) indicator lights up on
the display.
• If a program has been stored in memory, the program
is called up.
3
Press UP or DOWN to select the
track number, then press SET.
• You can select the track number directly
using the number button(s). (See “To go
to another track directly using the
number buttons.”)
4
Repeat step
3
to program other tracks you
want.
5
Press CD 3/8.
The tracks are played in the order you have
programed.
If you try to program a 21st track
“FULL” will appear on the display.
To stop playing, press 7.
To exit from Program Play, press PRGM
(program) before or after playing.
• The PRGM (program) indicator goes off.
• The Program remains even when you select
another play mode (Normal or Random Play).
Play mode setting (Normal, Program, and Random
Play) will not change even if you do the following
operations;
• Changing the source—selecting the CD player as the source
restores the previous play mode.
• Turning off the unit—turning on the unit restores the previous
play mode.
To check the program contents
You can check the program contents
by pressing ¢ or 4 before or
after playback.
• ¢ : To check the contents in the
programmed order.
• 4 : To check the contents in the reverse order.
Track number Program step number
1 2 3
4 5 6
7 8 9
10 +10
PRGM
ST
PRGM
UP
DOWN
SET
ST
PRGM
CD
PRGM
CD
EN16-19_UX-J60&50[B]f.pm6 02.12.23, 9:34 AM17
To Next Page
Loading...
Need help?
General
