JVC UX-P400 User Manual

8
English
Daily Operations
—Playback
1 Turn on the power.
The STANDBY/ON lamp on the main unit lights in
green.
• Without pressing STANDBY/ON , the System
turns on by pressing one of the source selecting
buttons in the next step.
2
Select the source.
Playback automatically starts if the selected source is
ready to start.
• If you press AUX, start playback source on the
external component.
3
Adjust the volume.
4 Operate the target source as explained
later.
To turn off (stand by) the unit
2
1
3
PRESET UP
PRESET DOWN
GROUP UP
GROUP DOWN
4,7,¢
REV.
MODE
FM MODE
SET
10 keys
2
1
VOLUME
STANDBY/ON
3
4
The STANDBY/ON lamp on the main unit
lights in red.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
Otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
STANDBY/ON

JVC UX-P400 Specifications

General

Brand	JVC
Model	UX-P400
Category	Stereo System
Language	English