16 - English
Adding the cleaning agent
• Fill the detergent reservoir with .......
..... Detergent tablet and water or
..... Detergent concentrate and water.
Observe metering recommendations on the
packaging label of the detergent.
Meter out the cleaning agent (cleaning agent
metering valve)
– medium quantity: centre-position
– large quantity: “+” position
– small quantity: “–” position.
Twist the spray lance in the “–” direction until
the stop.
Recommended cleaning method
1. Spray the cleaning agent on the dry surface
sparingly and let it react (but not dry out).
2. Wash off the loosened dirt with the high-
pressure jet.
Master switch to “0”.
Draw out power plug.
Draw out the mains cable until no more unwinding
noises can be heard. Then when you release the
cable it will be automatically wound up.
Operation Finishing operations
Cleaning agents
For trouble-free operation and for matching to
the relevant cleaning task we recommend our
Kärcher cleaning agents and care range. Please
let us advise you or ask for information about
them. Here is a small selection:
Universal cleaner Profi RM 555 ULTRA
Automobile cleaner Profi RM 565 ULTRA
House and garden cleaner
Profi RM 570 ULTRA
Boat cleaner Profi RM 575 ULTRA
When the water has been supplied from the
water main
Close the water supply tap.
Separate the unit from the water connection.
When the water has been supplied from an
open container
Unscrew the suction hose with filter at the
water inlet of the unit.
To Next Page
Loading...
Need help?
General
