EasyManuals Logo
Home>Kärcher>Water Pump>BP 2 Cistern

Kärcher BP 2 Cistern User Manual

Kärcher BP 2 Cistern
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
– 3
For safety reasons, we rec-
ommend that you operate the
appliance only via a earth-
leakage circuit breaker (max.
30 mA).
The electrical connection of
the system may only be per-
formed by a qualified electri-
cian. Please follow the re-
spective national regulations!
This appliance is not intended
for use by persons with limit-
ed physical, sensory or men-
tal capacities or lacking expe-
rience and/or skills, unless
such persons are accompa-
nied and supervised by a per-
son in charge of their safety
or they have received precise
instructions on the use of this
appliance and have under-
stood the resulting risks.
Children may only use this
appliance if they are over the
age of 8 and supervised by a
person in charge of their safe-
ty, or if they have received in-
structions on the use of this
appliance and have under-
stood the resulting risks.
Children must not play with
this appliance.
Supervise children to prevent
them from playing with the
appliance.
Cleaning and user mainte-
nance must not be performed
by children without supervi-
sion.
1 Check valve (pre-assembled)
2 Handle
3 Power cord with plug
4 Connection G1 (33.3) internal
thread
5 Intake grille/ pre-filter
6 Float switch
7 Connection adapter for pumps G1
8 Hose connection pieces 1" and 3/4"
9 Hose clip
10 Holder float switch
Caution
Risk of injury or damage due to
toppling appliance.
Prior to every operation, place
the appliance on a level surface
and secure it against rolling
away.
Illustration
Connect garden hose or lifting tube:
When using a garden hose, screw
the connection adapter into the
connection piece.
Additional sealing is not required.
Screw a fitting hose connection
piece onto the connection adapter.
Attach the hose end to the hose
connection piece and secure it by
means of a hose clamp.
Tighten the hose clamp using a
ratchet (approx. 5 Nm).
Illustration
Push the holder for the float switch
into the handle bore until it locks in
place.
Operation
Description of the Appliance
Preparing the Appliance
16 EN

Other manuals for Kärcher BP 2 Cistern

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher BP 2 Cistern and is the answer not in the manual?

Kärcher BP 2 Cistern Specifications

General IconGeneral
Flow rate5700 l/h
Grain size1.5 mm
Maximum delivery height32 m
Maximum operating pressure3.2 bar
AC input voltage230 V
AC input frequency50 Hz
Proper useGarden
Product colorBlack, Metallic, Yellow
Immersible-
Cable length10 m
Dimensions (WxDxH)130 x 130 x 445 mm
Weight and Dimensions IconWeight and Dimensions
Weight10000 g

Related product manuals