English 13
► With the engine running, pull trigger
to operate unit.
► Liquid detergent is drawn into the unit
and mixed with water.
► Apply detergent to work area.
► Do not allow detergent to dry on
surface.
► Always flush the detergent tank with
fresh water when the cleaning job is
done, to rinse/flush any remaining
detergents from the injection system.
NOTE: For best results see Cleaning
Tips for specific information on how to
clean different surfaces.
This unit has been designed for use
with cleaning detergents
recommended by the manufacturer.
The use of other cleaning detergent
may affect the operation of the
machine and void the warranty.
Always Use Kärcher Detergent for
Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure
washer. The special formula won't
clog the filter and will protect the
internal parts of the pressure washer
for a longer life. For Kärcher
Detergents, check your retailer or visit
our website:
www.karcherresidential.com
Never use:
▬ Bleach, chlorine products or other
corrosive chemicals.
▬ Liquids containing solvents (i.e., paint
thinners, gasoline, oils.)
▬ Tri-sodium phosphate products.
▬ Ammonia products.
▬ Acid-based products.
These chemicals will harm the unit
and will damage the surface being
cleaned.
Use of these items will void the
warranty.
► Move the engine stop switch to the
OFF position.
For engine details see engine
manual.
► Release trigger and engage safety
lock.
► If detergents have been used, insert
1 gallon of fresh water into Detergent
Tank. Siphon water at low pressure
Taking a Break
...five minutes or more
Shutting Down
& Clean Up
To Next Page
Loading...
Need help?
General
