Keba KeMes A1 Series Brief Description

4) Press the operating button once to display the state of charge.
5) Press the operating button twice to switch off the device again. The device con-
tinues charging.
Once appears on the switched-on display, the battery is completely charged.
Materials and surfaces
Material Easy to measure
Not measurable / hard to
measure
1)
Aluminum x
Steel x
Stainless steel x
Galvanized sheets x
Non-metallic materials x
1)
These materials usually cannot be measured or can be measured only with limited
accuracy.
Surface Easy to measure
Not measurable / hard to
measure
2)
Smooth surface x
Sheets with protective foil x
Clean surface x
(Heavily) scaled sheets x
Electrolytically galvanized sheets
for machine reading
x
Painted sheets x
Enameled sheets x
Pickled surface x
Mechanically treated surface
3)
:
● Brushed surface x
● Ground surface x
● Blasted surface x
Highly reflective (glassy)
surface
x
Dirty/corroded surface x
Scratched surface x
Surface with oil or rust stains x
Surface with weld spatter x
2)
These surfaces usually cannot be measured or can be measured only with limited
accuracy.
3)
Mechanically processed surfaces can be measured when a protective film is at-
tached.

Keba KeMes A1 Series Specifications

General

Brand	Keba
Model	KeMes A1 Series
Category	Measuring Instruments
Language	English