Keba KeMes A1 Series Brief Description

Switching on the Bluetooth wireless interface (valid for A2xx)
1) Navigate to the Bluetooth menu entry. The device serial number is displayed in
the Bluetooth menu.
2) Enable the wireless connection by pressing the operating button once. The
Bluetooth icon appears on the display. The device is now ready for a wireless
connection to be set up.
How a wireless connection is set up and how the device is coupled to the receiver
depend on the version and are described in the operating instructions.
Sending measured values after a manual measurement (valid for A2xx)
If the device is connected to a receiver, the device flashes once the measurement of
the measuring angle is complete. You can send the angle value to the receiver by
briefly pressing the operating button once.
When it is pressed twice briefly, the measured value is discarded and ---.--° ap-
pears on the display. Briefly pressing the button again starts a new measurement.

Keba KeMes A1 Series Specifications

General

Brand	Keba
Model	KeMes A1 Series
Category	Measuring Instruments
Language	English