Safety
Introduction
In addition to the Series 2600B System SourceMeter
®
Instrument,
you should have received:
1. Keithley USB ash drive containing the Model 2400 software
emulation personality script.
2. Interlock DB-25 male connector kit hardware.
3. One RJ-45 LAN crossover cable for the 2614B. Two RJ-45
LAN crossover cables for the 2611B and 2612B.
4. Power line cord.
5. One 8-pin screw terminal connector for the 2611B. Two 8-pin
screw terminal connectors for the 2612B and 2614B.
6. UL safety supplement (not shown).
7. Safety Precautions (not shown).
8. 2611B, 2612B, and 2614B System SourceMeter Instruments
Quick Start Guide (this document; not shown).
Refer to the packing list for additional items that might have
shipped with your instrument.
TestConnect
Safety
FAQs
Next Steps
Introduction
Unpack