Keithley 3700A Series User Manual

Connect the instrument
Install and connect a switching card
Unqualified personnel can install a switching card; however, external
connections to the switching module must be performed by qualified
service personnel.
The Series 3700A instruments support the following cards:
 Model 3720 Dual 1×30 Multiplexer Card (automatic CJC with
3720-ST accessory)
 Model 3721 Dual 1×20 Multiplexer Card (automatic CJC with
3721-ST accessory)
 Model 3722 Dual 1×48 High Density Multiplexer Card
 Model 3723 Dual 1×30 High Speed Reed Relay Multiplexer Card
To keep users safe, always read and follow all
safety warnings provided with each of the
instruments in your system.
 Model 3724 Dual 1×30 FET Multiplexer Card (60 differential
channels, automatic CJC with 3724-ST accessory)
 Model 3730 6×16 High Density Matrix Card
 Model 3731 6x16 High Speed Reed Relay Matrix Card
 Model 3732 Quad 4×28 Ultra-High Density Reed Relay Matrix
Card
 Model 3740 32-Channel Isolated Switch Card
 Model 3750 Multifunction Control Card (40 digital I/O bits, 2
analog output channels, and 4 counters)
For a complete list of cards that are available, see www.keithley.com
.
Safety
Unpack Connect
FAQs
Next steps
Introduction Test

Keithley 3700A Series Specifications

General

Brand	Keithley
Model	3700A Series
Category	Multimeter
Language	English