Carefully consider and congure the appropriate output-
o state, source levels, and compliance levels before
connecting the instrument to a device that can deliver
energy. Failure to consider the output-o state, source
levels, and compliance levels may result in damage to the
instrument or to the device under test.
Power supply
100 VAC to 240 VAC, 50 Hz to 60 Hz
(autosensing)
Maximum VA
240 VA
Operating altitude
Maximum 2000 m (6562 ft) above
sea level
Operating
temperature
0 °C to 50 °C, 70% relative humidity
up to 35 °C
Derate 3% relative humidity, 35 °C to 50 °C
Storage temperature
25 °C to 65 °C
Pollution degree
1 or 2
DC source output
30.3 W maximum
±200 VDC maximum
±1.515 A at ±20 VDC
±101 mA at ±200 VDC
Pulse region 4*
Region maximums: 10 A at 5 V
Maximum pulse width: 1 ms
Maximum duty cycle: 2.2%
Power and environmental specications
For indoor use only.
Measurement
input
Measurement category O
Voltage: 200 VDC maximum HI to LO,
250 VDC LO to ground
Current: 101 mA at 200 V;
1.515 A at 20 V
Impedance: Variable
*See full specications for other pulse regions
To Next Page
Loading...
Need help?
General
