- 13 -
ATTACHMENTS ON HANDLE
NOTE: If the PowerMate is attached, turn
vacuum cleaner off before removing handle
from wand.
1. Press wand release
button and pull up on
handle.
2. Slide attachments
into handle as needed.
All except crevice tool
will click into place.
See ATTACHMENT USE
TABLE (page 14).
NOTE:
To remove Pet PowerMate, dusting brush,
and/or floor brush, press the Wand
Release button and slide out.
TO REINSTALL:
Insert the attachment, press down into
place, and close the tool storage cover
securely.
DUSTING BRUSH, CREVICE TOOL,
& PET POWERMATE
1. Lift the tool storage cover to open.
2. Remove attachment as needed. See
ATTACHMENT USE TABLE (page 14).
To Next Page
Loading...
Need help?
General
