STAINLESS STEEL
Do not use a steel-wool pad; it will scratch
the surface.
To clean stainless steel surfaces, use a hot,
damp cloth with a mild detergent suitable for
stainless steel surfaces. Use a clean, hot,
damp cloth to remove soap. Dry with a dry,
clean cloth.
If food soil remains, try a general kitchen
cleaner.
For hard-to-clean soil, use a standard
stainless-steel cleaner, such as Ben-AmP
or Cameo. ®
Apply cleaner with a damp sponge. Use a
clean, hot, damp cloth to remove cleaner.
Dry with a dry, clean cloth. Always scrub lightly
in the direction of the grain.
After cleaning, use a stainless-steel polish,
such as Stainless Steel Magic, ® Revere
Copper and Stainless Steel Cleane_ or Wenol
All Purpose Metal PolishP Follow the product
instructions for cleaning the stainless-steel
surface.
Remove screw
COOKTOP LIGHT/NITE LIGHT
Replace the burned-out bulb with a 120 volt,
20 watt (max.), halogen bulb (WB36X10213),
available from your nearest Sears Parts &
Repair Center. Call 1-800-4-MY-HOME. _
1 To replace the cooktop light/nite light, first
disconnect the power at the main fuse or
circuit breaker panel, or pull the plug.
2 Remove the screw from the side of the light
compartment cover and lower the cover
until it stops.
3 Be sure the bulb is cool before removing.
Remove the bulb by pulling it straight out.
4 Push the new bulb straight into the
receptacle all the way.
5 Raise the light cover and replace the screw.
Connect electrical power to the oven.
28
To Next Page
Loading...
Need help?
General