• Threading the Machine
For threading, refer to the description of conventional
sewing (see page 16 ).
Pass the needle thread through the hole in the
Embroidery Foot P in a downward direction.
Guide the thread around the thread holder from the
frontside. (Leave 2 to 3 cm [1"] hanging.)
(D Threadbolder
(_) Needle thread
(_) Bobbin thread
• To Attach the Embroidery Hoop to the Machine
Turn the knob so it is parallel with the hoop, and set it
on the carriage.
Attach the outer hoop by fitting the prongs into the
carriage, and turning the knob clockwise.
C) Knob
(_ Carriage
74
To Next Page
Loading...
Need help?
General
