Kenmore 385 User Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
• Presser Foot Types
Zigzag Foot
Straight Foot
To Snap On
Pin
To Snap On the Presser Foot:
1. Ptace the presser foot so the hori-
zontal pin on the foot lies just
under the groove of the foot
holder.
2. Lower the presser foot holder to
lock the presser foot in place.
NOTE :
If you do not hear the
presser foot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
A: Zigzag foot
Use this foot for both straight and zigzag
stitching.
Uses: Zigzag stitching (seepage 31),
Bar tacking (see page33),
Button sewing (seepage 35),
Rick-rack stretch (see page36),
Three-step zigzag (see page37),
Overcast stretch (seepage38),
Lace work (see page40),
Two-point shell stitching
(see page5_00),
Smocking (see page 51),
Stretch patching (seepage 51),
Fagoting (seepage 52),
Herring bone stretch (see page 52),
Elastic stretch (see page 53),
Box stitching (see page 53),
Two-point box stitch (see page 54),
Overedging stitch (seepage 54).
H: Straight foot
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 28),
Topstitching (see page 29),
Straight stretch (see page 30).
11

Kenmore 385 Specifications

General

Brand	Kenmore
Model	385
Category	Sewing Machine
Language	English