Kenmore 6600 User Manual (English)

Questions and Answers:

J
Jennifer HarrisonAug 15, 2025
Why are my clothes not drying in Kenmore 6600 Dryer?
- S
  Stacy LopezAug 15, 2025
  Several factors can cause clothes to not dry properly or take too long in your Kenmore dryer. The lint screen might be clogged, so clean it before each load. Ensure you've selected the appropriate cycle, and avoid overloading the dryer, which prevents proper tumbling. Check for obstructions in the exhaust vent or hood and ensure it's the correct length and diameter. Also, fabric softener sheets may be blocking the grill, and the dryer should be in a room with a temperature above 45ºF (7ºC) with adequate ventilation.
M
Michael JonesAug 18, 2025
What to do if Kenmore Dryer won't start?
- J
  James Shaw DDSAug 19, 2025
  If your Kenmore dryer isn't starting, first, ensure the door is completely closed. Then, press and hold the START/PAUSE button until you hear the drum moving. Check your household fuses or circuit breakers, as electric dryers use two. Replace both fuses or reset the breaker. If it continues, the dryer might not have the correct power supply (electric dryers need 240-volt), or you might be using the wrong type of fuse (use a time-delay fuse). If issues persist, consult a qualified electrician.
M
Michael HarringtonAug 21, 2025
Why does my Kenmore 6600 make unusual noises?
- M
  myersreneeAug 22, 2025
  Unusual sounds from your Kenmore dryer can stem from a few causes. If the dryer hasn't been used recently, a thumping sound might occur initially. Check for items like coins or buttons caught between the drum and the dryer's front or rear. For gas dryers, a clicking gas valve is normal. Ensure the dryer is correctly installed and leveled. Also, knotted clothing can cause bouncing and vibration, so separate items and restart the dryer.