To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if my Kenmore 796. 8147 Dryer will not turn on?
If your Kenmore Dryer won't turn on, ensure the power cord is securely plugged into a grounded outlet matching the dryerโs rating plate. Also, check your house fuse and reset the circuit breaker or replace the fuse. Do not increase fuse capacity. If a circuit overload is the problem, have it corrected by a qualified electrician.
Why is my Kenmore 796. 8147 Dryer not heating?
If your Kenmore dryer isn't heating, check if a house fuse is blown, the circuit breaker has tripped, or there's a power outage. Reset the circuit breaker or replace the fuse, without increasing fuse capacity. If it's a circuit overload, have an electrician correct it. For gas models, confirm both the house and dryer gas shutoff valves are fully open and that other gas appliances are working. Note that electric dryers can run without heat if there's a circuit problem.
How to reduce static in clothes after drying in my Kenmore 796. 8147?
To reduce static in clothes after drying in your Kenmore Dryer, use a fabric softener or the STATIC SHIELD option (if available), following the manufacturerโs instructions. Overdrying can also cause static, so adjust settings and use a shorter drying time or AUTO DRY cycles with a LESS DRY setting. Also, synthetic fabrics are prone to static, so try using fabric softener, LESS DRY, and/or shorter TIMED DRY settings.
What to do if the CHECK VENT light is blinking on my Kenmore 796. 8147 Dryer?
If the CHECK VENT light is blinking on your Kenmore Dryer, it could be that the exhaust system is too long, has too many turns or restrictions, or there's a partial blockage in the ductwork due to lint buildup or a foreign object. Install a shorter or straighter duct run, referring to the Installation Instructions for details. Immediately check and clean the ductwork. The dryer can still be used, but drying times will be longer, and energy consumption will increase.
General| Brand | Kenmore |
|---|---|
| Model Number | 796.8147 Series |
| Color | White |
| Wrinkle Guard Option | Yes |
| End of Cycle Signal | Yes |
| Power Source | Electric |
| Voltage | 240V |
| Amperage | 30 Amps |
Details benefits and coverage of the Master Protection Agreement for extended product life and support.
Information and contact for professional installation of major home appliances and systems by Sears.
Step-by-step emergency actions to take if a gas leak is detected in the vicinity.
Lists fundamental safety precautions to follow when using the appliance to prevent hazards.
Information on substances known to cause cancer or reproductive harm, and potential exposure from gas appliances.
Explains the necessity of grounding the appliance to reduce the risk of electric shock.
Provides crucial safety guidelines for installing the dryer to prevent fire, shock, or injury.
Details safety warnings related to dryer exhaust ducting, material, and installation to prevent fire.
Lists safety precautions for operating steam functions to prevent burns and other hazards.
Outlines essential safety measures for electrical connections, grounding, and wiring to prevent shock and fire.
Identifies and describes the main parts and features of the Kenmore Elite Steam Dryer.
Provides essential physical dimensions, weight, and drying capacity specifications for the dryer.
Specifies ideal placement conditions and environmental considerations for dryer installation.
Details the necessary space requirements around the dryer for proper installation and ventilation.
Instructions for installing the dryer with optional pedestal or stacking kits.
Lists and describes available optional accessories for the dryer.
Outlines necessary gas pressure and supply line requirements for gas dryer models.
Specifies the electrical connection and grounding requirements for gas dryer models.
Step-by-step guide for connecting the gas supply to the dryer, including safety checks.
Details the electrical connection and grounding requirements for electric dryer models.
Outlines specific electrical connection requirements for dryers installed in mobile or manufactured homes.
Instructions for connecting a 4-wire power cord to the dryer's terminal block.
Instructions for connecting a 3-wire power cord to the dryer's terminal block.
Guides users on checking the dryer's exhaust system for common issues affecting performance and safety.
Explains how to use the chart to determine maximum vent duct length based on hood type and elbows.
Provides guidelines for proper ductwork routing and connection to maximize dryer performance and reduce lint.
Details the steps for connecting the dryer's vent to the existing exhaust system.
Instructions for adjusting leveling feet to ensure the dryer is stable and operates properly.
Step-by-step guide on how to reverse the dryer door swing for installation flexibility.
A checklist and tests to confirm proper installation and initial operation of the dryer.
Identifies and explains the function of each button and display element on the dryer's control panel.
Step-by-step instructions for loading, starting, and operating the dryer cycles.
Details available options, fabric types, and settings for the Auto Dry cycles.
Details available options, fabric types, and settings for Timed Dry cycles.
Provides guidance on sorting clothes and loading the dryer for optimal results and care.
Explains the different indicators and displays on the dryer panel, including time, status, and warnings.
Describes how to adjust temperature, dryness level, timed drying, and chime volume.
Explains special features like Wrinkle Guard, Control Lock, My Cycle, Damp Dry Signal, and Drum Light.
Details how to use steam functions like Steam Refresh, Static Shield, and Iron Ready for garment care.
Instructions on how to properly fill the steam feeder with water for steam functions.
Provides guidance on cleaning the exterior, interior, and lint filter of the dryer.
Explains the importance of maintaining the exhaust system and the function of the Check Vent indicator.
Instructions on how to use the Kenmore Connect system for remote diagnostics and technician support.
Lists common dryer problems, their possible causes, and suggested solutions before contacting service.
Continues troubleshooting common dryer issues like long drying times, wrinkles, and shrinking.
Addresses specific issues like error codes, lint on clothes, steam feature problems, and odors.
Outlines the terms, coverage, exclusions, and duration of the Kenmore Elite limited warranty.
