20
Pan position for two rack baking.
Pan position for one rack baking.
Convection air fl ow
Setting Oven Controls
Convection Bake uses a fan to circulate the oven heat evenly
and continuously. The improved heat distribution allows for
even cooking with excellent results. Multiple rack cooking
may slightly increase cook times for some foods, but the
overall result is time saved.
Convection Bake
Benefi ts of convection bake:
• Superior multiple oven rack performance.
• Some foods cook up 25 to 30% faster, saving time and
energy.
• No special pans or bakeware required.
See the example below to set conv bake, starting
immediately with the default setting of 350°F (177°C):
After the oven reaches set temperature, a beep will indicate
the oven is ready. The oven will continue to maintain this
temperature until the cooking feature is canceled.
Conv Bake may be set with the following options:
• Conv Convert
• Cook Time and/or Delay Start
The following temperature settings apply to the conv bake
feature:
• Auto-suggest (default) setting: 350°F / 177°C
• Min. bake setting : 170°F / 77°C
• Max. bake setting: 550°F / 288°C
• When baking with a single rack use rack positions 2 or 3.
When using 2 racks use rack positions 2 & 4. When using
3 racks use rack positions 1, 3 & 4.
• Cookies and biscuits should be baked on pans with no
sides or very low side to allow heated air to circulate
around the food.
• Food baked on pans with a dark fi nish will cook faster.
• When placing multiple food items in the oven allow 2-4”
(5-10cm) of space between the food items for proper air
circulation.
For best results
The Conv Bake feature is recommended when baking on
multiple racks.
If your recipe instructions are for normal baking and
you wish to use convection bake, follow the Convection
Convert option instructions. The convection convert option
will automatically adjust the oven temperature so that
convection baking may provide the best possible results.
1. Press CONV BAKE
If needed, use numeric keypads to enter a diff erent oven
temperature.
2. Press START
NOTE
You may press STOP any time when setting the control or
during the cooking process.
To Next Page
Loading...
Need help?
General