Setting the Clock and
Minute Timer
(some models)
h_R A C c_c_
B n.,._n
Your model maybe equipped with the clock and minute timer shown
below. To set the clock and minute timer, follow these instructions:
To Set the Clock
When the range is first plugged in, or when the power supply to the range
has been interrupted, "12:00" will flash in the display window.
1. Slide switch C (CLOCK/TIMER) to the CLOCK position.
2. Push in and hold button A (HOUR) until the correct hour appears in the
display. (The numbers will only count forward.)
3. Push in and hold button B (MINUTE) until the correct minutes appear in
the display.
To Set the Minute Timer
1. Slide switch C (CLOCK/TIMER) to the TIMER position, "0:59' (59
MINUTES) will appear in the display window. The timer can be set for
any amount of time from 1 minute to 1 hour and 59 minutes.
• To set a time more than 59 minutes, push in and release button A
(HOUR). The timer will jump in at the maximum 1 hour and 59 minutes.
The time can now be adjusted down by pushing in and holding button B
(MINUTE) until the correct time appears in the display window.
• To set a time less than 59 minutes, push in and hold button B (MINUTE)
until the correct minutes appear in the display. (The minute timer will
automatically start when the button is released.)
2. When the set time has passed, the control will display "0:00" and beep
continuously. Slide switch C (CLOCK/TIMER) to the CLOCK position to
cancel the timer and return to the clock mode.
To Next Page
Need help?
General