B. MAKE ELECTRICAL CONNECTION (pgs. 16-26)
Hold-downscrew
Terminalblockcover
If using a power cord:
Tools Needed:
1h-inch nut #2 Phillips head
driver (shown) screwdriver
or socket wrench
Flashlight (optional
depending on installation)
Parts Needed:
_I _ Strain relief
New 3- or 4-wire, 30-amp.
U.L.-listed power supply
cord kit (includes strain relief)
If making a direct wire connection:
Tools Needed:
1/4-inch nut #2 Phillips head
driver (shown) screwdriver
or socket wrench
Wire stripper Flashlight (optional
depending on installabon)
Parts Needed:
10-gauge, 3- or 4-wire,
flexible armored
or non-metallic
sheathed copper cable
(with grounding wire)
3/4-inch,
U.L.-listed,
strain relief
To Next Page
Loading...
