16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
PRESET EQ DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
:Selects a preset equalizer suitable to the music
genre. (Select [
USER
] to use the settings made in [
EQ PRO
].)
[
DRIVE EQ
] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST LEVEL1
/
LEVEL2
/
LEVEL3
:Selects your preferred bass boost level.;
OFF
:Cancels.
LOUDNESS LEVEL1
/
LEVEL2
:Selects your preferred low and high frequencies
boost to produce a well-balanced sound at a low volume level.;
OFF
:Cancels.
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
LPF SUBWOOFER THROUGH
:All signals are sent to the subwoofer.;
85HZ
/
120HZ
/
160HZ
:Audio signals with frequencies lower than 85Hz/ 120Hz/
160Hz are sent to the subwoofer.
SUB-W PHASE REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [
THROUGH
] is selected for
[
LPF SUBWOOFER
].)
FADER R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
:Preset the initial
volume level of each source. (Before adjustment, select the source you
want to adjust.)
SOUND RECNSTR
(Sound
reconstruction)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression.;
OFF
:Cancels.
• [
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUBWOOFER
]. (
4
)
• [
SUB-W LEVEL
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
DISPLAY SETTINGS
Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer.
• If you have set [
DIMMER TIME
], it will be canceled once you press and
hold this button.
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
DISPLAY
], then press the knob.
3 Turn the volume knob to select an item
(
17
)
, then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press and hold to exit.
To return to the previous setting item, press .
AUDIO SETTINGS
JS_KWD_DPX302U_KN_EN_5.indd 16JS_KWD_DPX302U_KN_EN_5.indd 16 20/10/2015 11:13:12 AM20/10/2015 11:13:12 AM
To Next Page
Loading...
Need help?
General
