KERN 770-60 User Manual

770/GS/GJ-BA-defsi-0023 83
1.4.2 External Adjusting
Menu code selection: 1 9 1*
The external adjusting weight is a standard fitting for
KERN
balances without a built-in Adjusting Weight. This adjusting
weight allows the checking and new adjustment of your
balance at any time.
When a zero readout is displayed, press the
CAL
key . This
starts adjusting. The adjusting weight in grams is then
displayed.
Errors or interference at the start of the adjusting routine are
indicated by the error code “
Err 02
“. If this is the case, tare
and press the
CAL
key again when a zero readout appears.
Centre the adjusting weight on the weighing pan. The
balance then adjusts automatically. At the end of adjusting,
the adjusting weight readout and the stability symbol “g“ are
displayed.
1.4.3 Blocking the Adjusting Functions
The adjusting functions can be blocked by menu code
setting 1 9 7.
* = factory setting for balances with built-in Adjusting Weight

KERN 770-60 Specifications

General

Brand	KERN
Model	770-60
Category	Scales
Language	English