ADB-BA-e-1510 27
10.3 Description of individual functions
10.3.1 Automatic zero point correction
This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the “stability
compensation“. (e.g. slow flow of liquids from a container placed on the balance,
evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.
Call up menu item „C3“, see chap. 10.1
Select the desired setting using the PRINT key, see
chap. 10.2.
Save / back to weighing mode, see chap. 10.1
To Next Page
Loading...
Need help?
General
