EasyManuals Logo
Home>KERN>Scales>CM

KERN CM User Manual

KERN CM
14 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
CM-BA-e-0618
14
9 Troubleshooting
The balance should be switched off for a short time following an interruption in the
programme sequence . It is then necessary to repeat the weighing process from the
beginning.
Help:
Interruption Possible cause
Weight display is not illuminated.
The balance is not switched on.
The batteries are wrongly inserted, the
batteries are empty
No batteries are attached
The weight display changes continu-
ally
Draught/air movement
Table/floor vibrations
The weighing plate is in contact with for-
eign matter.
Electromagnetic fields / static charging
(choose different location/switch off inter-
fering device if possible)
The weighing result is obviously in-
correct
The balance display is not set to zero
Adjustment is no longer correct.
Great fluctuations in temperature.
Electromagnetic fields / static charging
(choose different location/switch off inter-
fering device if possible)
Switch the balance off if other error messages should appear and then switch on
again. Contact the manufacturer if the error message does not disappear.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KERN CM and is the answer not in the manual?

KERN CM Specifications

General IconGeneral
BrandKERN
ModelCM
CategoryScales
LanguageEnglish

Related product manuals