KERN EOB Series User Manual

- 18 - EOB-B_EOE-B_EOS-B-SH-e-1911
Increase number with .
After entering LF 2, the scale will display the last saved setup.
All steps have to be completed to save the changes, otherwise
the scale will keep the last setup
Proceed with Weight Calibration after LF2 Spec Calibration
LF 3 Gravitational (G value) Pre-Calibration:
Sender G value: Set it before Weight Calibration
The G value will be denied when the value is greater than
9.83217 (Polar G value) or less than 9.78031 (Equator G
value)
Factory Default: 9.79423
Switch to the next digit to the right with .
Increase number with .
Press to confirm

KERN EOB Series Specifications

General

Brand	KERN
Model	EOB Series
Category	Scales
Language	English