EW/EG-SU-e-9811 22
(1) Remove DJD board
(1) Remove the upper case referring to page 9.
(2) Unplug connectors at CN6 and CN4 on DJD board.
With battery option, unplug CN3 with output option, unplug CN1 and CN2 in addition.
(3) Unsolder T1, T2 and T3.
(4) Remove DJD board by removing two DJD fixing screw.
2. Installation of new PCB
(1) Install a new DJD board with two fixing screws.
(2) Plug connectors.
CN1 Output cord
CN3 Battery cord
CN6 DJ power cord (DC 9V in)
T1, T2, T3 Tuning-fork cord
(3) Cover the scale refering to page 10.
To Next Page
Loading...
Need help?
General
