EW-BA-defsi-0620
28
Baud rate 7. b.L. 1*.
2
3
1200 Baud
2400 Baud
4800 Baud
Unit commutation 8. Set. 1*
2
3
4
g
g/ct
not documented
not documented
Not documented 0. GLP 1 Always use this setting
Not documented A. PrF. 3 Always use this setting
11 Important information
These electronic balances are precision instruments. It is designed for use in a
self-controlled electromagnetic environment. That means that in such an
environment radio equipment, such as mobile phones, must not be used in direct
vicinity. In case strong electromagnetic fields should arise, deviations of the
indication are possible. Avoid disturbing environmental conditions such as currents
and vibrations as well as a rapid change of the ambient temperature. If necessary
readjust the balance after a change of temperature.
Avoid high humidity, vapours and dust as the balance is not hermetically closed.
Do not let the balance come into direct contact with liquids as these could enter
the measuring cell. Therefore only clean the balance with a dry or damp cloth. Do
not use solvents as varnished or plastic parts could be damaged.
A warming up time of a few minutes after switching the balance on will stabilise the
measuring values. Place the object carefully on the weighing pan. Avoid any
constant load on the weighing pan even when out of use. Avoid shocks, thrusts
and extreme impairments by all means. Remove spillages immediately.
When the programme cycle is disturbed switch the balance off and then on again.
Start the weighing operation again.
Never use the balance in rooms where there is a danger of explosion. The serial
version is not explosion-proof.
Opening of the balance causes invalidity of warranty.
Check the balance daily with the supplied check weight.
If necessary adjust the balance.
The warranty is nullified if the balance is opened.
To Next Page
Loading...
Need help?
General
