28 EWJ-BA-e-1615
7.9 Automatic adding-up
With this function the individual weighing values are automatically added into the
summation memory when the balance is unloaded without pressing and edited,
when an optional printer is connected.
The totalizing function is active at menu setting
„SALE-Mode no“, see chap. 8.2.
• Menu settings, chap. 8.2:
„F3 COM“
„S 232
„P AUto“
„SALE n“
• The totalizing function is not active when the weight is under 20d.
Add up:
Place item to be weighed A, e.g. 100 g.
After stabilisation control has taken place, you will hear an audio sound.
Remove the weighed good. The weighing value is added to the summation
memory and printed if an optional printer is connected.
More weighed goods can only be added when the display ≤ zero.
Place item to be weighed B, e.g. 200 g.
After stabilisation control has taken place, you will hear an audio sound.
To Next Page
Loading...
Need help?
General
