KERN GAB User Manual

GAB/GAS/FAB-BA-e-0720
11
6.2 Unpacking
Carefully remove the balance from the packaging, remove plastic cover and setup
balance at the intended workstation.
6.2.1 Setup
Level balance with foot screws until the air bubble of the water balance is in the
prescribed circle.
6.2.2 Scope of delivery
Serial accessories:
KERN GAB / GAS / FAB
• Balance
• Operating Manual
• Mains adapter
6.3 Mains supply or battery operation
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
Output voltage mains adaptor: 3.2 V to 6.0 V CD (polarity: inside PLUS)
The balance switches off automatically according to the pre-defined disconnecting
time. To achieve this, keep the MODE key pressed down for 6 seconds, then tap the
MODE key repeatedly and store the selected disconnecting time by pressing the
TARE key.
The following applies:
• P 0: Balance not turning off.
• P 1: Balance turning off automatically after 20 minutes
• P 2: Balance turning off automatically after 60 minutes

KERN GAB Specifications

General

Brand	KERN
Model	GAB
Category	Scales
Language	English