GAB/GAS/FAB-BA-e-0720
16
Verification instructions
An EU type approval exists for balances described in their technical data as
verifyable. If a balance is used where obligation to verify exists as described above, it
must officially verified and re-verified in regular intervals.
Re-verification of a balance is carried out according to the respective national
regulations. The validity for verification of balances in Germany is e.g. 2 years.
The legal regulation of the country where the balance is used must be observed!
The adjustment switch is inside the balance. After verification the balance is sealed at
the indicated positions.
Verification of the balance is invalid without the "seal".
Position of the “official seals“:
GAB / GAS 3K1DM GAB / GAS 15K5DM
GAB / GAS 6K2DM GAB / GAS 30K10DM
Seals
Seals
To Next Page
Loading...
Need help?
General
