2
Your Kestrel Weather & Environmental Meter is designed to provide accurate measurement of current conditions only.
Depending on your location and environment, conditions may change rapidly.
Rapid temperature and humidity changes (i.e., moving your meter from indoors to outdoors) may cause inaccurate readings
of temperature and humidity, as well as all readings that rely on either of these values. Before relying on Kestrel Weather &
Environmental Meter readings, use care to either a) force air ow over the sensors by waving or slinging your meter through the
air; or b) wait until your unit’s readings have stabilized, indicating that it has equilibrated to its new environment.
To maximize the accuracy and reliability of your readings:
• Ensure that your Kestrel Meter is in good repair and within factory calibration.
• Take readings frequently and carefully according to the guidelines above.
• Allow your meter’s readings to stabilize after signicant changes in temperature or humidity (i.e., changing location from
indoors to outdoors).
• Allow a margin of safety for changing conditions and reading errors (2-3% of reading is recommended).
Use extra care and good judgment when referring to your Kestrel Weather & Environmental Meter to
make any decisions regarding safety, health or property protection.
To Next Page
Loading...
Need help?
General
