Kestrel 1000 User Manual

6
Turning ON and OFFxx
• Press
to turn on.
• Hold
for 3 seconds to turn o.
The Kestrel Meter will automatically turn o if no buttons
have been pressed for 45 minutes.
Select Measurement Mode
• Use
or to access each Measurement screen
• The instantaneous Measurement value will be
displayed on each screen and updated once per
second.
Each Measurement screen will ash a brief “Hint” to clarify
which Measurement is being displayed. Note: Hints are not
displayed in the Kestrel 1000.
The Measurement’s icons and units of measure will be
displayed in the lower line of the screen.
75.2
°F
°F
Temperature “Hint”
ashes before
Temperature
Measurement Screen
Select the Unit of Measure
• Select the unit of measure. While holding
,
press
to scroll through the available units
of measure for that measurement.
Adjust the Clock
*This applies to the 2500, 2500NV, 3500, 3500NV and 3500DT.
• Adjust the clock. Simultaneously press and
to access clock setting. While the time is
blinking, press or to change the time.
Hold either button down to adjust quickly.
Simultaneously press and to exit clock
setting.
GETTING STARTED
SETUP + OPTIONS

Kestrel 1000 Specifications

General

Brand	Kestrel
Model	1000
Category	Measuring Instruments
Language	English