Key Automation STAR3024 User Manual

5
EN
TECHNICAL DATA STAR3024
Speed cm/s
2,5
Thrust Force N
1400
Working cycle %
80
Opening time at 90° sec
adjustable
Control unit
CT20224
Power supply Vac (Vdc)
(24)
Absorption A
3,5
Engine power W
85
Degree of protection IP
54
Dimensions (L - P - H) mm
796 - 115 - 177
Weight Kg
3,2
Operating temperature °C
-20°+55
Leaves maximum weight Kg
400
The STAR gear motors are destined to be installed in systems for
the automation of gates with hinged doors.
The STAR gear motors have been designed and constructed to
be tted onto hinged doors within the weight limits indicated in the
technical specications table.
The use of gear motors for applications which di󰀨er from those
indicated above is prohibited.
2 - PRODUCT OVERVIEW
2.1 - Description of the product
2.2 - Technical characteristics
Before installing this product, verify and check the following steps:
- Check that the gate or door are suitable for automation
- The weight and size of the gate or door must be within the
maximum permissible operating limits specied in Fig. 2
- Check the presence and strength of the security mechanical
stops of the gate or door
- Check that the mounting area of the product is not subject to
ooding
- Conditions of high acidity or salinity or proximity to heat sources
could cause malfunction of the product
- Extreme weather conditions (for example the presence of snow,
ice, high temperature range, high temperatures) may increase the
friction and therefore the force required for the handling and initial
starting point may be higher than under normal conditions.
- Check that the manual operation of gate or door is smooth and
friction-free and there is no risk of derailment of the same
- Check that the gate or door are in equilibrium and stationary if
left in any position
- Check that the power line to supply the product is equipped with
proper grounding safety and protected by a magnetothermal and
di󰀨erential security device
- Provide the power system with a disconnecting device with a
gap of contacts enabling full disconnection under the conditions
dictated by the overvoltage category III.
- Ensure that all materials used for the installation comply with
current regulations
3 - PRELIMINARY CHECKS

Key Automation STAR3024 Specifications

General

Brand	Key Automation
Model	STAR3024
Category	Gate Opener
Language	English