Kicker KM8 User Manual

(fKICKER
KM
Coaxial
Speakers
Owner's
Manual
Authorized
KICKER
Dealer:
----------------------
Purchase Date:
Speaker
Model Number:
The
KICKER
KM
coaxial speakers
are
specifically designed for mounting
in
free-air applications. The
speakers do not require a sealed enclosure for optimum performance.
It
is
important to isolate the sound
coming off the front of the driver from the sound radiating from the back of the driver. This isolation
is
usually accomplished by using the driver
in
a factory speaker location, or
in
a location with a semi-isolated
rear chamber.
SPECIFICATIONS
Model:
KM4
KM65
KMB
Woofer
[in,
mm]
4,
100
6-1/2,
160
8,
200
Tweeter
[in,
mm]
1/2, 13 3/4,
20
1
J
25
Rated Impedance
[0]
2,
4
2,
4
4
Peak Power
Handling [Watts]
150
195
300
Continuous
Power
Handling [Watts
RMS]
50
65
150
Sensitivity [ 1
W,
1
m]
89
90
92
Frequency Response
[Hz]
60-20k
35-21 k
30-21
k
Mounting Hole Diameter
[in,
mm]
3-13/16,
97
5-1/8,
130
6-11/16,170
Mounting Depth
[in,
mm]
1-7/8
,
48
2-7/8, 72
3-1/4, 82
Grilles
Yes Yes
Yes
Tweeter Magnet Material Neodymium Neodymium
Neodymium
Tweeter Dome Material
PEl
(polyether imide) Titanium Titanium
Tweeter Design
Balanced Dome Dome Dome
Woofer Cone Material
Polypropylene Polypropylene Polypropylene
Woofer Surround Material Santoprene
Santoprene
Santoprene
LOCATION
The sound produced by the
KM
coaxials
is
directional. Find the best location for stereophonic sound.
If
necessary, add more
KM
coaxial speakers to the system to help distribute and balance the sound-stage.
After determining the best mounting locations, carefully check the areas where the mounting hardware
will
be placed.
Pro Tip:
You
are one
KXM
Amplifier and a few cables away from a complete, high-quality system with
rock-solid bottom end as only available from
KICKER! Please
ask your dealer about
KICKER
KXM
amplifier
upgrades.
2

Kicker KM8 Specifications

General

Brand	Kicker
Model	KM8
Category	Speakers
Language	English