6
OPERATION
FAVORITES
The Favorites button will allow you to view and set your favorite station from the
following sources: FM - AM - WX 10 favorites can be set for each source.
Setting a Favorite
1. Select the station you wish to add to the favorites list.
2. Press the Favorites button and select the Favorites preset you wish to set.
3. Press and Hold the knob (8) button for 2 seconds to set.
Audio Settings
Audio Menu: Press the Menu (3) button from any source screen to enter the
Audio Settings Menu. Pressing the Menu (3) button will scroll between the
available settings. Rotate the knob (8) to adjust the setting.
Bass: Rotate the knob left and right to adjust the Bass. Pressing Menu (3)
XJMMNPWFUPUIFOFYUJUFN"EKVTUNFOUJTGSPNUP
Treble: Rotate the knob left and right to adjust the Treble. Pressing Menu (3)
XJMMNPWFUPUIFOFYUJUFN"EKVTUNFOUJTGSPNUP
Balance: Rotate the knob left and right to adjust the Balance. Pressing
.FOVXJMMNPWFUPUIFOFYUJUFN"EKVTUNFOUJTGSPN-FGUUP3JHIU
Fader: Rotate the knob left and right to adjust the Fader. Pressing Menu (3)
XJMMNPWFUPUIFOFYUJUFN"EKVTUNFOUJTGSPN'SPOUUP3FBS
Equalizer: When the EQ is ON, Bass & Treble controls are not acces-
sible. The KMC50 has the following preset options for the EQ:
OFF - FLAT - CLASSICAL - POP - ROCK - CUSTOM. Rotating the
knob left and right to scroll between the options. When CUSTOM is
selected press Menu (3) to enter the custom frequency adjustment
below. To enable Bass, Mid & Treble controls, EQ must be set to OFF.
When using the CUSTOM EQ you can adjust the following frequencies:
60Hz - 250Hz - 250Hz - 1kHz - 3kHz - 8kHz
Rotate the knob (8) to adjust the value. In each of these frequencies
you can adjust the values from -6 to 6.
Sources Cont.
AUX Input Source:
Function: How To:
Mute: Press the Play/Pause (6) button.
Bluetooth Source:
Function: How To:
/FYU5SBDL1SFTTUIF4FFL6QCVUUPOPODF
Previous Track: Press the Seek Down (5) button once.
Pause: Press the Play/Pause (6) button.
Bluetooth Device Name: Media Center. There is no password required.
When the KMC50 is not paired with a device, “In Pairing Mode” will appear
on the screen until a device is paired. Press and Hold Favorites (2) button
for 2 seconds to manually disconnect from a paired device and reenter
pairing mode. Press and Release Favorites (2) button to reconnect last
known device.