WARNING: PLEASE READ CAREFULLY AND THOROUGHLY
IMPORTANT: This carbon monoxide alarm is designed to detect carbon
monoxide gas from ANY source of combustion. It is NOT designed to
detect any other gas.
CAUTION: This alarm will only indicate the presence of carbon
monoxide gas at the sensor. Carbon monoxide gas may be present in
other areas. Never restart the source of a CO problem until it has been
fixed. NEVER IGNORE THE ALARM!
• Industry experts recommend a CO alarm be installed on each level
of the home—ideally on any level with fuel burning appliances
and outside of sleeping areas.
WARNING: This product is intended for use in ordinary indoor
locations of family living units. It is not designed to measure
compliance with commercial or industrial standards. It is not
suitable for installation in hazardous locations as defined in your
local building code. It is not designed for use in a recreational
vehicle (RV) or boat.
• The installation of this device should not be used as a substitute
for proper installation, use, and maintenance of fuel burning
appliances, including appropriate ventilation and exhaust systems.
• This alarm does not prevent CO from occurring, nor can it solve
any existing CO problem.
WARNING: This device is designed to protect individuals
from acute effects of carbon monoxide exposure. It may not fully
safeguard individuals with specific medical conditions. If in doubt,
consult a medical practitioner. Individuals with medical problems
may consider using warning devices which provide audible and
visual signals for carbon monoxide concentrations under 30 PPM.
• This alarm has not been investigated for carbon monoxide
detection below 70 PPM.
• This combination Smoke/CO/Strobe alarm requires a continuous
supply of electrical power – it will not work without power.
3. Limitations of CO Alarms
To Next Page
Loading...
Need help?
General
