1. Introduction
2. Product Features and Specifications
3. Limitations of Smoke and CO Alarms
4. Recommended Locations
5. Locations To Avoid
6. Installation / Activation Instructions
7. Operation And Testing
8. Alarm Visual and Audible Indicators
9. Smoke Alarm Nuisance And Hush
10. Battery
11. Discharging / Killing The Battery
12. General Carbon Monoxide (CO) Information
13. Maintenance
14. Good Safety Habits
15. Warranty
1. Introduction
Model P4010ACLEDSCOCA AC wire-in photoelectric smoke / CO
alarm and LED strobe light can be directly interconnected with Kidde
3-wire smoke, heat and CO alarms. This alarm is acceptable for use in
all residential applications where smoke alarms are required, and can
be used as a Single Alarm or in a Multiple Alarm system, (up to 24
devices).
Thank you for purchasing this integrated smoke / CO / strobe alarm. It
is an important part of your family’s home safety plan. You can trust
Kidde to provide the highest quality safety products. We know you
expect nothing less when the lives of your family are at stake.
Please take a few minutes to thoroughly read this user guide, and save
it for future reference. Teach children how to respond to the alarms,
and that they should never play with the unit.
If you have any questions about the operation or installation of your
alarm, please call our toll free Consumer Hotline at 1-800-880-6788.
IMPORTANT: Read all instructions before installation and keep
this user guide near the alarm for future reference.
WARNING! Do not try to repair this unit yourself.
WARNING! Disconnection or loss of AC and depleted
batteries will render this alarm inoperative.
WARNING! The strobe light is extremely bright. Do not look
directly at the light when the light is flashing.
This alarm detects products of combustion using photoelectric
technology. After ten (10) years of cumulative power up, this unit will
“chirp” two times every 30 seconds. This is an “operational end of
life” feature which will indicate that it is time to replace the alarm.
To help identify when to replace the unit, a label showing the
installation and replace by date has been affixed to the side of the
alarm.
To Next Page
Loading...
Need help?
General
