AC Connector
Model Number:
P4010ACLEDSCOCA (3 wire interconnect unit)
Power:
120 V AC (60 Hz, 863 mA max) wire-in connector with sealed lithium
battery backup for the smoke and CO alarm only. Strobe will not flash
without AC power.
Interconnectable to other compatible alarms (see Installation /
Mounting Instructions section for details).
Note: If more than one P4010ACLEDSCA and/or P4010ACLEDSCOCA
strobe is in the interconnected system, all other P4010ACLEDSCA and/
or P4010ACLEDSCOCA strobes will synchronize within 20 seconds of an
initiating alarm.
ALARM EVENTS:
Smoke Alarm: Repeating pattern of 3 long beeps in time with red
LED blinks, followed by “Fire! Feu!” Strobe flashes once every second
continuously.
CO Alarm: Repeating pattern of 4 quick beeps in time with red LED
blinks, followed by “Warning! Carbon Monoxide! Monoxyde de
carbone!”. Strobe will flash 4 times every 5 seconds.
Temperature:
Operating Range: 4.4°C (40°F) to 37.8°C (100°F)
Humidity:
Operating range: 10-95% relative humidity, non-condensing
Audible Alarm:
85+ dB at 10’ @ 3.2±0.5 KHz pulsing alarm, with voice messages “Fire!
Feu!” “Warning! Carbon Monoxide. Monoxyde de carbone!”.
CO Alarm Response Times:
70 PPM = 60-240 min.
150 PPM = 10-50 min.
400 PPM = 4-15 min.
2. Product Features and Specifications
To Next Page
Loading...
Need help?
General
