Kipor IG2000P Operation Manual

15
5. STARTING THE ENGINE
Before starting the engine, disconnect any load from the AC receptacle.
1. Turn the engine switch to the ON position.
2. Move the choke lever to the START position.
NOTE:
Do not use the choke when the engine is warm or the ambient air temperature is high.
3. Pull the starter grip until resistance is felt then pull the starter grip briskly toward the
arrow as shown below.
ON
OFF
ON
ENGINE SWITCH
CHOKE LEVER
START
START

Kipor IG2000P Specifications

General

Brand	Kipor
Model	IG2000P
Category	Portable Generator
Language	English