KIRLOSKAR DB 80/26 User Manual

2
This is a proprietary document of Kirloskar Brothers Limited, Kirloskarvadi-416308, Dist-Sangli (India)
ISSUE DATE: 17.09.2010 LAST REV. DATE:
WARRANTY
We warrant that the pump supplied from us is free from defective
material and faulty workmanship. This warranty holds good for a period
of 12 months from the date of commissioning the equipment or 18
months from the date of dispatch from our factory, whichever is earlier.
Our liability in respect of any complaint is limited to replacing
part/parts free of charge ex-works or repairs of the defective part/parts
only to the extent that such replacement / repairs are attributable or
arise solely from faulty workmanship or defective material.
This warranty holds good only for the products manufactured by us.
KIRLOSKAR BROTHERS LIMITED
KIRLOSKAR BROTHERS LIMITED
REGD. AND HEAD OFFICE UDYOG BHAVAN, TILAK ROAD PUNE-411002

KIRLOSKAR DB 80/26 Specifications

General

Model	DB 80/26
Head	26 m
Voltage	415 V
Material	Cast Iron
Speed	2900 rpm
Suction Size	80 mm
Delivery Size	80 mm
Flow Rate	800 lpm
Power	7.5 kW
Phase	Three Phase
Head Range	Up to 26 m
Discharge	800 lpm

Summary

WARRANTY

GENERAL

Safety Instructions

General safety advice and requirements for understanding instructions.

Caution

Warnings about loose clothing, jewelry, and hazardous operations.

Operation

Equipment Operation

Steps and checks for starting, running, and stopping the pump.

MAINTENANCE MANUAL

Maintenance EHS Instructions

Safety precautions and hazard awareness during maintenance activities.

Preventive Maintenance

Corrective Maintenance

Troubleshooting common pump problems and their causes.

GENERAL INSTRUCTIONS FOR MAINTENANCE, OPERATION & MAINTENANCE OF KIRLOSKAR CENTRIFUGAL PUMPS

Warning

General warning about equipment usage beyond specified capacities.

Foundation

Alignment

Importance and procedures for pump and driver shaft alignment.

Leveling the Unit

Flexible Coupling Alignment

Factors That May Disturb Alignment

Piping

Suction Pipe

Stuffing Boxes and Packing

Procedures for stuffing box cleaning, packing, and sealing.

Ball Bearings

Priming

Methods for priming the pump casing and suction pipe before operation.

Starting

Crucial step of ensuring the pump is primed before starting.

Running

Stopping

Spare Parts

Pump Trouble

Common causes of pump issues, often related to faulty installation.

Break Down-Cause-Check Points

Table listing pump problems and corresponding check points.

Check Points

Detailed list of potential issues and their causes for pump troubleshooting.